Sana Acid Clean

SANA ACIDCLEAN is specially designed low foaming hard surface cleaner suitable for removal of dirt, stain, water scale deposits or cement patches etc. from ceramic tiles, china or porcelain surfaces.  It is an excellent all-purpose brightener-cleaner liquid which finds application for finishing work of newly built buildings, plants, hospital floors, institutional and industrial floors etc. 

• It is an all-purpose acidic cleaner for general cleaning operations.
• It finds extensive application for finishing work of newly built buildings.
• As an effective wall or tile cleaner for bathrooms, floor, especially for vertical surfaces.
• For descaling mild water scale deposits from swimming pools, wash rooms, wet areas or other hard surfaces and floors.
• As an acidic cleaner for ceramics, stainless steel, mild steel and plastics.
• It is low foaming and does not contain any disinfectant.

DIRECTION FOR USE

For best results remove oil and grease from surface, apply SANA ACIDCLEAN full strength on the surface by brush or tissue or rag.  Wash off with water after 15 minutes.  Do not allow SANA ACIDCLEAN to dry on the surface as it leaves a whitish mark on the surface.  Flush with large quantities of water. Repeat procedure, if necessary.

SANA ACID CLEAN should not be used on delicate floors, decorative coatings, fiberglass surfaces, or other mild surfaces.  In such cases, it is always advisable to try a hidden area of the surface to be cleaned and check any etching will result, before proceeding to actual cleaning work.